How to set up a breadboard circuit for ATtiny45 to blink five LEDs in sequence.     BREADBOARD CONNECTIONS ATtiny Pin 0 to LED positive (signal, white) ATtiny VCC (+) to power positive (+, red) ATtiny GND (-) to power negative (-, black) LED negative to resistor (breadboard connection) Resistor to negative power (-, black) repeat for Pin 1, […]

  RESISTANCE hand sewn 8” trace has a resistance of 10 ohms machine sewn top thread 8” trace has a resistance of 42 ohms machine sewn bottom thread 8” trace has a resistance of 16 ohms THREAD QUALITY easy to thread a size 24 crewel needle does not fray or whisker easy to sew by hand as well as machine […]

  Preparing for a workshop takes double the time to teach the workshop.   SHopping for the supplies.   Programing microcontrollers, packaging the tiny electronic parts, and then fitting everything into a suitcase.   Its all behind the scene, but without rigorous preparation the workshop will suffer.

  Red LEDs are electron hogs. They will always be the first to glow and even prevent other LEDs from illuminating.     When designing your circuits be sure to isolate the red LEDs from other colors otherwise you’ll have a darkwad in the final design.   read more on LEDs at wikipedia

  Sew traces with conductive thread and red or black bobbin threads to indicate the electrical polarity. Adjust the tension allowing the bobbin thread to pull thru to the fashion fabric so that the polarity is easily determined. Reverse side of the fabric clearly shows the bobbin thread. Keep bobbins wound and ready for action.  

RESISTANCE thread does not register continuity or resistance hand sewn 8” trace does not register continuity or resistance machine sewn top thread 8” trace does not register continuity or resistance machine sewn bottom thread 8” trace does not register continuity or resistance THREAD QUALITY easy to thread a size 24 crewel needle easy to sew by hand as well as […]

  When using conductive thread in a sewing machine choose a needle with a large eye so the thread will flow smoothly and not fray.   I use a Schmetz 90/14 embroidery needle on both my industrial machine as well as my Bernina 180.     For hand sewing conductive thread my favorite needle is a John James Chenille size […]

  I’ve been thinking the eTextile Lounge deserves a new photo, but I love this one so much!    

  RESISTANCE hand sewn 8” trace has a resistance of 7 ohms machine sewn top thread 8” trace has a resistance of 13 ohms machine sewn bottom thread 8” trace has a resistance of 7 ohms THREAD QUALITY easy to thread a size 24 crewel needle does not fray or whisker easy to sew by hand as well as machine […]